DONATE

IAHR Document Library


« Back to Library Homepage « Proceedings of the 33rd IAHR World Congress (Vancouver, 2009...

Energy Loss in Circular Drop Manholes

Author(s): F. Granata; G. De Marinis; R. Gargano; W. H. Hager

Linked Author(s): Giovanni De Marinis, Willi H. Hager, Francesco Granata

Keywords: Drop manhole; Energy dissipation; Hydraulics; Open channel flow; Sewer

Abstract: Drop manholes are often used as energy dissipators in sewer systems. A supercritical approach flow to a drop manhole has considerable hydraulic energy causing excessive air entrainment, tailwater waves, pipe abrasion and structural damage. Drop manholes may undergo various flow types. An experimental research has been conducted at the Laboratorio di Ingegneria delle Acque, University of Cassino, Italy on two circular manhole models of different sizes. It was observed that the energy dissipation of a drop manhole is mainly affected by operational conditions, i.e. the flow regime, depending on the manhole geometry and the approach flow features. The energy loss is also affected by the manhole diameter and by the drop height. It may become smaller than expected under certain circumstances, resulting in a high tailwater velocity. This undesirable condition must be avoided because drop manholes should significantly reduce peak velocities. The maximum velocity can be predicted by an empirical equation proposed herein.

DOI:

Year: 2009

Copyright © 2024 International Association for Hydro-Environment Engineering and Research. All rights reserved. | Terms and Conditions