DONATE

IAHR Document Library


« Back to Library Homepage « Journal of Hydraulic Research 2008 Issue 2

Evaluation of high-velocity plunging jet-issuing characteristics as a basis for plunge pool analysis

Author(s): P.F.A. Manso; E.F.R. Bollaert; A.J. Schleiss

Linked Author(s):

Keywords: Dynamic pressures; plunging jets; pressure distribution; spillways; turbulence intensity

Abstract: This paper presents experimental work on the characteristics of jets issuing from water-releasing structures. Systematic experimental tests have been performed at near-prototype velocities of up to 30 m using a cylindrical jet nozzle. Dynamic pressures were measured along the diameter at the nozzle outlet with an acquisition rate of up to 2 kHz, for different upstream supply conditions. These measurements allowed assessing the mean and the fluctuating characteristics of the jet. The influence of supply circuit secondary currents, aeration and geometrical contraction on jet turbulence intensity and velocity profiles is discussed. The initial turbulence intensity varies from 2 to 8%, whereas the kinetic energy correction factor ranges from 1.0 to 1.1. Statistical analysis of pressure measurements shows that jet core pressures follow a Gaussian distribution fairly well for non-exceedence probabilities between 0.1 and 0.999. The experimental results and an extensive literature survey are used to define issuance parameters relevant for engineering practice.

DOI: https://doi.org/10.1080/00221686.2008.9521852

Year: 2008

Copyright © 2024 International Association for Hydro-Environment Engineering and Research. All rights reserved. | Terms and Conditions